What does traceroute show from the backbone to sc0 in both cases (when it works and when it doesn't)?
Thanks, Zsombor At 02:04 PM 6/25/2003 +0000, riposi alessandro wrote: >i have this topology into my POP: > >two 6509( with MSFC2) which are connected with two juniper. The default >route of sc0 is ip_address of MSFC2, while the MSFC2 speaks with juniper >with OSPF process. The juniper originate the default always ad so the MSFC2 >receives the default by Ospf (External type2). > >my problem is the following: >with this configuration the MSFC can reach all ip of our backbone, while the >sc0 doesn't reach anyone ip (if we do a trace we see a series of * just by >first step). >If i configure the defualt manually into MSFC, with the command ip route >0.0.0.0 0.0.0 next hop, the sc0 can reach all ip. >Do you know the cause of this behavior? >Best Regards > >Paolo Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71359&t=71349 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]