Did you set up the clock rate on the DCE side? I'm assuming you have HDLC encapsulation on both ends.
Here is a link that you can refer to on the command: http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_comm and_reference_chapter09186a00800880c2.html#1019126 Watch the wrap. Good luck on your studies. Mike -----Original Message----- From: KW S [mailto:[EMAIL PROTECTED] Sent: Monday, July 07, 2003 9:22 AM To: [EMAIL PROTECTED] Subject: cisco back to back cable [7:71992] Dear All I have a 2501 and 2505 and I am trying to set up a homelab..These 2 routers come with a cable which is a DB60(DTE) and the other end is a DB60(DCE).This is wat that is label on the cable. Anyway, I try to connect this cable to the serial interface of the 2 routers...and both the routers are showing serial is down and line protocol is down. I guess I have used the wrong cable...or maybe I have missed out something. Please comment.. Regards, kws Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71998&t=71992 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
