I actually want to see broadcast traffic.
----- Original Message -----
From: "Charles D Hammonds" 
To: 
Sent: Tuesday, July 15, 2003 11:57 PM
Subject: RE: Sniffer Recommendation [7:72372]


> span port is not a sniffer requirement, but one of the switch. switches
send
> unicast/multicast traffic out only the ports that it is destined to. so,
if
> you want to see anything other than straight broadcast traffic, span is
> required.
>
> charles
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
> Nathan
> Sent: Tuesday, July 15, 2003 9:33 PM
> To: [EMAIL PROTECTED]
> Subject: Sniffer Recommendation [7:72372]
>
>
> I need a sniffer that doesn't require spanning a port.  Any suggestions?




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72407&t=72372
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to