Yes, you can do that you are need to setup up DDR then setup backup interface on leased line interface to that DDR and then setup the interface PRI become member that DDR so the interface of the DDR will be stand by, not the interface of the PRI install the route through PRI with higher AD
wisnu ""Stuart Pittwood"" wrote in message news:[EMAIL PROTECTED] > I know this is basic & the answer is probably yes but I'll ask anyway > > We have a 1Mb leased line betweem two sites, if we also had 8 channels of a > PRi at both sites, in the event that the leased line was unavailble could > the available PRI channels multilink and dial into the remote site to give > at least some connectivity if yes, could these channels also be used for > remote access when they are not needed as a backup to the leased line. > > Any input appreciated. > > Thanks > > Stu P Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72725&t=72691 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
