I am still not able to connect to my web and ftp services. I have pasted the relative info below. Am I missing something or do is my config wrong? : PIX Version 6.1(3) nameif ethernet0 outside security0 nameif ethernet1 inside security100 access-list 101 permit icmp any any unreachable access-list 101 permit icmp any any time-exceeded access-list 101 permit icmp any any echo-reply access-list 102 permit tcp any any eq ftp access-list 102 permit tcp any any eq www pager lines 24 interface ethernet0 10baset interface ethernet1 10full mtu outside 1500 mtu inside 1500 ip address outside dhcp setroute ip address inside 192.168.0.100 255.255.255.0 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp interface ftp 192.168.0.1 ftp netmask 255.255.255.255 0 0 static (inside,outside) tcp interface www 192.168.0.1 www netmask 255.255.255.255 0 0 access-group 102 in interface outside
Thanks for the help so far ""Scott"" wrote in message news:[EMAIL PROTECTED] > static (inside,outside) tcp interface ftp 10.1.1.3 ftp netmask > 255.255.255.255 0 0 > > Scott > ""NetEng"" wrote in message > news:[EMAIL PROTECTED] > > I'm trying to do port redirection on my PIX and here's the example from > > Cisco. My problem is my outside interface is set for DHCP. How do I change > > the command to reflect a dynamic outside address? > > > > static (inside,outside) tcp 172.18.124.99 ftp 10.1.1.3 ftp netmask > > 255.255.255.255 0 0 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73069&t=73065 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]