I get the error "Invalid global IP address OUTSIDE". I also tried it w/o 'interface'. If you can offfer any more help I would appreciate it as I really need to get this fixed. Thanks.
""Robert Edmonds"" wrote in message news:[EMAIL PROTECTED] > With regards to these two lines: > > > static (inside,outside) tcp interface ftp 192.168.0.1 ftp netmask > > 255.255.255.255 0 0 > > static (inside,outside) tcp interface www 192.168.0.1 www netmask > > 255.255.255.255 0 0 > > I believe they should read: > > static (inside, outside) tcp interface OUTSIDE ftp 192.168.0.1 ftp netmask > 255.255.255.255 > static (inside, outside) tcp interface OUTSIDE ftp 192.168.0.1 ftp netmask > 255.255.255.255 > > If I am wrong, I'm sure I will be severely reprimanded...I mean corrected. > > > ""NetEng"" wrote in message > news:[EMAIL PROTECTED] > > I am still not able to connect to my web and ftp services. I have pasted > the > > relative info below. Am I missing something or do is my config wrong? > > : > > PIX Version 6.1(3) > > nameif ethernet0 outside security0 > > nameif ethernet1 inside security100 > > access-list 101 permit icmp any any unreachable > > access-list 101 permit icmp any any time-exceeded > > access-list 101 permit icmp any any echo-reply > > access-list 102 permit tcp any any eq ftp > > access-list 102 permit tcp any any eq www > > pager lines 24 > > interface ethernet0 10baset > > interface ethernet1 10full > > mtu outside 1500 > > mtu inside 1500 > > ip address outside dhcp setroute > > ip address inside 192.168.0.100 255.255.255.0 > > global (outside) 1 interface > > nat (inside) 1 0.0.0.0 0.0.0.0 0 0 > > static (inside,outside) tcp interface ftp 192.168.0.1 ftp netmask > > 255.255.255.255 0 0 > > static (inside,outside) tcp interface www 192.168.0.1 www netmask > > 255.255.255.255 0 0 > > access-group 102 in interface outside > > > > Thanks for the help so far > > > > > > ""Scott"" wrote in message > > news:[EMAIL PROTECTED] > > > static (inside,outside) tcp interface ftp 10.1.1.3 ftp netmask > > > 255.255.255.255 0 0 > > > > > > Scott > > > ""NetEng"" wrote in message > > > news:[EMAIL PROTECTED] > > > > I'm trying to do port redirection on my PIX and here's the example > from > > > > Cisco. My problem is my outside interface is set for DHCP. How do I > > change > > > > the command to reflect a dynamic outside address? > > > > > > > > static (inside,outside) tcp 172.18.124.99 ftp 10.1.1.3 ftp netmask > > > > 255.255.255.255 0 0 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73112&t=73065 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]