Hi, has anyone had any problems with connceting a NP-2T serial interface to a 2500 serial interface. I ordered a cable with the DB60 end being the DTE and the DB50 (NP-2T) being the DCE. I have put the clockrate command on the DCE end but cannot get the interface to come up. I tried different clock rate settings also. I understand that this may be a problem with the jumper settings on the 4000 but I just want to confirm if anyone has ever come across this issue. Appreciate the help.
2500 show controller output: HD unit 0, idb = 0x250D1C, driver structure at 0x258730 buffer size 1524 HD unit 0, RS-449 DTE cable cpb = 0xE2, eda = 0x2940, cda = 0x2800 RX ring with 16 entries at 0xE22800 00 bd_ptr=0x2800 pak=0x256354 ds=0xE26108 status=80 pak_size=0 01 bd_ptr=0x2814 pak=0x256620 ds=0xE267C4 status=80 pak_size=0 02 bd_ptr=0x2828 pak=0x2568EC ds=0xE26E80 status=80 pak_size=0 03 bd_ptr=0x283C pak=0x256BB8 ds=0xE2753C status=80 pak_size=0 04 bd_ptr=0x2850 pak=0x256E84 ds=0xE27BF8 status=80 pak_size=0 05 bd_ptr=0x2864 pak=0x257150 ds=0xE282B4 status=80 pak_size=0 06 bd_ptr=0x2878 pak=0x25741C ds=0xE28970 status=80 pak_size=0 07 bd_ptr=0x288C pak=0x2576E8 ds=0xE2902C status=80 pak_size=0 08 bd_ptr=0x28A0 pak=0x2579B4 ds=0xE296E8 status=80 pak_size=0 09 bd_ptr=0x28B4 pak=0x257C80 ds=0xE29DA4 status=80 pak_size=0 10 bd_ptr=0x28C8 pak=0x257F4C ds=0xE2A460 status=80 pak_size=0 11 bd_ptr=0x28DC pak=0x258218 ds=0xE2AB1C status=80 pak_size=0 12 bd_ptr=0x28F0 pak=0x258994 ds=0xE2B1D8 status=80 pak_size=0 13 bd_ptr=0x2904 pak=0x258C60 ds=0xE2B894 status=80 pak_size=0 14 bd_ptr=0x2918 pak=0x258F2C ds=0xE2BF50 status=80 pak_size=0 15 bd_ptr=0x292C pak=0x2591F8 ds=0xE2C60C status=80 pak_size=0 16 bd_ptr=0x2940 pak=0x2594C4 ds=0xE2CCC8 status=80 pak_size=0 cpb = 0xE2, eda = 0x3000, cda = 0x3000 TX ring with 4 entries at 0xE23000 ---------------------------------------------------------------- 4000 NP-2T show controller output: MK5 unit 1, NIM slot 2, NIM type code 7, NIM version 1 idb = 0x69E8, driver structure at 0xE6EFB8, regaddr = 0x8200400 IB at 0x603D640: mode=0x0108, local_addr=0, remote_addr=0 N1=1524, N2=1, scaler=100, T1=1000, T3=2000, TP=1 buffer size 1524 DCE V.11 (RS-449 or X.21) serial cable attached, clockrate 56000 RX ring with 32 entries at 0x3D6A8 : RLEN=5, Rxhead 0 00 pak=0xE7228C ds=0x6046264 status=80 max_size=1524 pak_size=0 01 pak=0xE70FEC ds=0x6042C84 status=80 max_size=1524 pak_size=0 02 pak=0xE732D8 ds=0x6049188 status=80 max_size=1524 pak_size=0 03 pak=0xE71494 ds=0x60439FC status=80 max_size=1524 pak_size=0 04 pak=0xE716E8 ds=0x60440B8 status=80 max_size=1524 pak_size=0 05 pak=0xE73780 ds=0x6049F00 status=80 max_size=1524 pak_size=0 06 pak=0xE71240 ds=0x6043340 status=80 max_size=1524 pak_size=0 07 pak=0xE7193C ds=0x6044774 status=80 max_size=1524 pak_size=0 08 pak=0xE71B90 ds=0x6044E30 status=80 max_size=1524 pak_size=0 09 pak=0xE72038 ds=0x6045BA8 status=80 max_size=1524 pak_size=0 10 pak=0xE72734 ds=0x6046FDC status=80 max_size=1524 pak_size=0 11 pak=0xE72988 ds=0x6047698 status=80 max_size=1524 pak_size=0 12 pak=0xE72BDC ds=0x6047D54 status=80 max_size=1524 pak_size=0 13 pak=0xE73084 ds=0x6048ACC status=80 max_size=1524 pak_size=0 14 pak=0xE7352C ds=0x6049844 status=80 max_size=1524 pak_size=0 15 pak=0xE739D4 ds=0x604A5BC status=80 max_size=1524 pak_size=0 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73127&t=73127 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
