Hi guys,
    I've a question to ask. Follow the config & show below. What routing
protocol are supposed to put the route 203.113.38.0 , 203.113.39.0 and
203.113.94.175 into the table? Shall it be OSPF or BGP?

Pichit

============================ Config
===========================================
interface GigabitEthernet0/0/0
 ip address 203.113.38.241 255.255.255.0

interface GigabitEthernet8/0/0
 ip address 203.113.39.241 255.255.255.0

interface Loopback0
 ip address 203.113.94.175 255.255.255.255

router ospf 100
 router-id 203.113.94.175
 log-adjacency-changes
 redistribute static subnets
 network 203.113.38.0 0.0.0.255 area 0
 network 203.113.39.0 0.0.0.255 area 0
 network 203.113.94.175 0.0.0.0 area 0
 maximum-paths 6
!
router bgp 9737
 no synchronization
 bgp router-id 203.113.94.175
 bgp log-neighbor-changes
 redistribute connected
 neighbor 203.113.94.182 remote-as 9737
 neighbor 203.113.94.182 update-source Loopback0
 neighbor 203.113.94.183 remote-as 9737
 neighbor 203.113.94.183 update-source Loopback0
 no auto-summary
 !

========================= show ip route
===============================================
lty_vpngw_01#sh ip route 203.113.38.0
Routing entry for 203.113.38.0/24
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Redistributing via bgp 9737
  Advertised by bgp 9737
  Routing Descriptor Blocks:
  * directly connected, via GigabitEthernet0/0/0
      Route metric is 0, traffic share count is 1

lty_vpngw_01#sh ip route 203.113.39.0
Routing entry for 203.113.39.0/24
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Redistributing via bgp 9737
  Advertised by bgp 9737
  Routing Descriptor Blocks:
  * directly connected, via GigabitEthernet8/0/0
      Route metric is 0, traffic share count is 1

lty_vpngw_01#sh ip route 203.113.94.175
Routing entry for 203.113.94.175/32
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Redistributing via bgp 9737
  Advertised by bgp 9737
  Routing Descriptor Blocks:
  * directly connected, via Loopback0
      Route metric is 0, traffic share count is 1




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73152&t=73152
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to