Hi, This is from a case study .... Can any one help on these ?
a) Setup Rxx such that when a user telnets to it they will receive a menu system that consists of the following options. Ability to display the IP routing table Ability to clear the IP routing table Ability to print off a Cisco TAC troubleshooting screen Exit to command line interface b) When issuing a telnet session from Rxx ensure that the destination IP address is not shown in the display. c) R1, R2 & R6 are not allowed subinterfaces on the frame-relay network that commonly connects them. R1, R2, R5 and R6 should be able to ping their own interfaces. " how it can be possible to ping it their own interfaces on a serial ??? " d) Make sure the frame-relay connection between R1 and R2 has a speed of 128k Cheers, Shab Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73435&t=73435 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
