Have you showed flash: what the image name is? http://www.cisco.com/en/US/partner/products/hw/iad/ps497/products_tech_note0 9186a0080110d2c.shtml#run_flash
rommon 1 > dir flash: Maybe you have to copy an new image trough xmodem ........... http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_tech_n ote09186a008015bfac.shtml Martijn -----Oorspronkelijk bericht----- Van: Jim Devane [mailto:[EMAIL PROTECTED] Verzonden: woensdag 13 augustus 2003 9:28 Aan: [EMAIL PROTECTED] Onderwerp: 2503 Console port [7:73965] hi, i am sure this is basic but I am having trouble. I have a 2503 that I would like to use for some testing... When I hook a laptop to it by console cable, I can see the router boot up, but after it is done booting I cannot get anymore response out of the darn thing! I can break the boot and go into rommon and ensured the confreg was 0x2102. for kicks I set it to o/r 0x2101 to put it into the boot image but the smae thing happened. It gets allt he way through and I can't get any further... any ideas? below is the screen capture of where I lose contact w/ the router. THANKS! jim 00:02:00: %SYS-5-CONFIG_I: Configured from memory by console 00:02:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down 00:02:48: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sun 03-Feb-02 22:01 by srani **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73969&t=73965 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html