Fellow Professionals-
I'm attempting this folly for the second time after giving up on it in
April, seeing as how my WAN provider STILL can't complete a frame
circuit between Austin and Denver.
My current config is a near copy of the sample config listed on CCO-
only it passes nothing; no SA, no pre-shared key, NOTHING. Following
the hitcount on the local PIX (running 5.1.2 software) I see my access
list 100 with a hitcount of 0. Checking the remote PIX I see the same
thing on access list 100- no hits. My PIX sits behind a 1605 gateway
rotuer and in front of a 3640 host router, with my remote configured
similarly except that the host router is a 4700. NAT is running on both
firewalls, and both firewalls can serve remote VPN clients with
pre-shared keys- but no tunnel.
Has anyone experienced a similar situation, or can anyone apply enough
IPSec/VPN expertise to make this work? I will submit my configs as
needed.
GWA
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
