Hi,
The XMODEM does not work wih all models. I tried with the 7200 and there was
no XMDOEM option. I did it by putting the flash in a router with two flash
banks and I download the IOS to the second one.
I am not sure about the 1700.
On Wed, 9 Aug 2000 16:14:21 +0200 , [EMAIL PROTECTED] wrote:
> What it means is that the bootstrap cannot find the IOS file on the flash
> and the system can not open it probably the binary file is corrupted just
> download another into the router, you can do it with XMODEM.
>
> GIL
>
> CCNA, CCDA
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 09, 2000 12:28 PM
> To: [EMAIL PROTECTED]
> Subject: erased flash
>
>
> Hi all,
>
> I need a help from you guys.
>
> I have a problem with one of the cisco router(1700 series). The router
> automatically goes into rommon mode and says that
>
> "can not open flash:
> unable to determine flash:
>
> The flash is corrupted or what?
>
> What can be the cause of this problem
> Thanks in advance
> Hitesh
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> This email was scanned using ESPG @ PubliCom Haifa.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
