Hi
Basically you have erased your main Cisco IOS, and you router is in Rom
Monitor mode (its alive but not as we know it!!) if you type the '?' key
you'll get a list of processor specific commands that will help you get the
router booted properly...
There is the default IOS that resides in the ROM that you should be able to
invoke.... this IOS is normally an early version and may not have all the
feature set you require... but its a start...
Good Luck
Anthony Awatefe
CCNA CCNP
----- Original Message -----
From: "Ganesh Chintalapati" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
Sent: Saturday, March 24, 2001 6:05 AM
Subject: erased flash
>
> Dear group,
>
> I recently was configuring ISDN on 1750 router. But accidently I have gi=
> ven
> #erase flash command from the prompt. And once I rebooted the router I g=
> ot
> the message "not able to find some number" and "not able to locate file f=
> lash"
> and I am getting rommon 1> prompt. Pls let me know how do I restore my r=
> outer
> to its normal working condition.
>
> This is very urgent, I would be most thankful if someone gives me the sol=
> ution
> at the earliest.
>
> Bye group,
>
> Ganesh.Ch
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
