By chance did you configure the correct port numbers on your router?
Michael Dingeldey CCDA, CCNP
Senior Network Engineer
Interactive Business Systems
Ph: (734) 542-9137
Fx: (734) 542-9149
-----Original Message-----
From: Tony Russell [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 09, 2000 1:17 PM
To: '[EMAIL PROTECTED]'
Subject: Microsoft Radius (IAS)
Has any successfully used Microsoft Radius (Internet Authentication Server)
with a cisco router. If so, what is the trick. Any special things to know
about.
I installed IAS and configured and started the service on my NT box. Set
the shared secret and client address fields.
I also setup the router using the approriate radius server, key and aaa
commands.
When ever I try to authenticate, it fails. I can check my event log in NT
to see that the router did try to use the Radius server for authentication,
but it fails everytime. Any tips.
Tony Russell
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]