config-reg 0x2102 - If you havn-t already got it sorted
Ajaz
Hans Stout wrote:
> Hi colleagues,
>
> I have a problem when I boot a 1601: the OK LED is blinking, I then connect
> to it through the console port and see that it is stuck with the RMON>
> prompt. When I enter the reset command, it boots up ok. After about 1 hour,
> the router reboots again and gets stuck with the RMON> prompt again. Could
> this be related to a hardware failure ?
> Thanks for your help in advance.
>
> Georg Pauwen
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
