RAM is correct, because the routing table needs to be rebuilt if the router is powered
of & on (from connected interfaces, static routes, & learned routes from whatever
routing protocol(s)you're running).
>>> "Frank Jordan" <[EMAIL PROTECTED]> 08/14/00 07:06AM >>>
An article said the routing table is located in RAM.
I got a little puzzled ,cause if the router is powered off by accident,
will the table get lost totally?
If the router is a backbone one,the table should be very big ,so after
the power cycle ,the router has to attain all the routes once again,it's
time consuming.
Does the router put some static routes in NVRAM or flash ,or all the
routes stay in ram ?
Thanks.
frank
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]