> Hey All,
>
> I have set up a network management server on NT to monitor my various
> cisco routers, pix etc - these devices only allow a Telnet connection from
> the mgmt server. I would like to be able to dial into my 3661 which is on
> the same segment as the mgmt server, telnet into the server an then use
> that as a staging point to telnet into the routers etc. I have trialed
> setting up a telnet daemon (fictional) on the server - this worked ok and
> let me telnet into the server but I can't go from there to the routers. I
> really don't want to run pcanywhere on the mgmt box for obvious reasons &
> I don't want to allow telnet access from any other device but the mgmt
> box. Due to my limited intelligence I can't figure out how to do what I
> want to do ! Any help / suggestions would be greatly appreciated.
> Cheers,
> Peter
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
