Amir,
Here's a copy of a post I sent five days ago, which dealt with this problem exactly.
I've also included the original poster's email as a reference.
Since the archives were likely off-line during the server upgrade, I won't mention
that this post would have been able to be found there. (-:
-- Leigh Anne
-----Original Message-----
From: Leigh Anne Chisholm [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 15, 2000 8:42 AM
To: Fanglo MA; Cisco@Groupstudy. Com
Subject: RE: 1600 startup-config
When you type "show version", you should see a configuration register value. Normal
setting for this value is 0x2102. Changing bit 6 of the 16 bit register will cause
the router to ignore the contents of NVRAM. Since the router bypasses your startup
configuration file, it prompts you for new settings.
You can change your configuration register by using the "config-register" global
configuration command. Type "config-register <value>".
-- Leigh Anne
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Fanglo MA
> Sent: Monday, August 14, 2000 8:05 PM
> To: [EMAIL PROTECTED]
> Subject: 1600 startup-config
>
>
> Dear group,
>
> I have no experience with CISCO 1600 router. And current I got
> one from ebay. When I try saving the configuration to NVRAM by command
>
> copy run start
>
> and then submit the reload command by which I expect the saved
> config will be executed. To my surprise, the router return to no
> configuration and ask for my setting!!
>
> Can anyone give me some guidance?
>
> Best regards,
> Fanglo MA
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Sunday, August 20, 2000 6:59 PM
> To: [EMAIL PROTECTED]
> Subject: cisco 2504 problem
>
>
> ok techies...
> here is a problem i been trying to sort out for a quite a little time now
> this router I purchased recently seems ok nothing is broken boots ok now
> the problem is everytime it boots up it has forgotten what the last
> configuration was I mean I always make config changes and give the comman
> "copy run star" and no error pops up but when I turn it off and back on
> again and there is stupid message asking me to redo the whole damn config
> file could someone tell me if it is the Flash or the IOS itself or
> something else that could be wrong with the router.
>
> Regards,
> Amir
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report m isconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
