Is this a new circuit, or one that was working and now is not?
>From: "Mike Baker" <[EMAIL PROTECTED]>
>Reply-To: "Mike Baker" <[EMAIL PROTECTED]>
>To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
>Subject: Internal CSU
>Date: Fri, 25 Aug 2000 9:15 -0500
>
>
>I can't find any online help for troubleshooting Cisco's internal CSUs.
>
>I have two routers, one on each end of a T1 circuit. Each router has a T1
>WIC
>in it.
>
>The interfaces are UP DOWN. If I turn on the loopback button on the remote
>router the local end comes UP UP. Both routers have keepalives enables and
>the
>circuit has been verified to be B8Zs all the way through. The WICs are set
>to
>their default value. I also tried adding clocking on one end - no luck.
>
>Any ideas?
>
>
>Michael K. Baker
>Telecom Network Analyst
>
>ALLTEL Information Services
>2000 Highland Road
>Twinsburg, Ohio 44087
>330-963-1648
>
>www.alltel.com
>INIHGROBMALATNAWI
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
