Thanks for the quick help---it usually is the simple solution isnt it..I am
an idiot....;-)
stuart
>From: "Michael Fountain" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: Re: no enable password set on 2504
>Date: Mon, 28 Aug 2000 12:23:20 GMT
>
>You will get this message if you try to get into enable mode and you are
>not coming in on the console port (ie - you are on the aux port or telneted
>into it)
>
>To fix it, plug into the console port and set the enable or enable secret
>password.
>
>
>>
>>I want to configure a 2504 for my home lab--When I want to go into enable
>>mode it tells me that %no password set . I cannot seem to get it to boot
>>into config mode and I cannot get it to take an enable password--any ideas
>>would be much appreciated.
>>
>>thanks
>>
>>stuart
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
