Try updating to IOS version 12.1.1 :) but watch out there are bugs for this
IOS
check out caveats.
Regards
Jason
-----Original Message-----
From: Steve Carson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 29, 2000 5:38 AM
To: [EMAIL PROTECTED]
Subject: Please Help
To all,
I am in need of some help. I have a 3640 router that is new. We got a 4
port ethernet module for it and a Network module that holds 2 WAN
interfaces. Put the ethernet module in and the IOS sees it and everything
is fine. Put the 2-port serial module in and nothing happens. Thought
module was bad so got a replacement today. Inserted the 2 WAN cards in the
new module and placed in router. Still nothing, does not see the WAN cards.
So then i placed the ethernet module in the same slot the WAN module was
in to make sure that slot works and it does. So then I took the 2 WAN cards
out of the module and put them in 2 spare 2600's we have to make sure that
they work, and they do. So this leaves me with this question. Is there
something that I must do to get the 3640 to recognize this Network Module
with the 2 WAN cards in it or by some strange luck did I just get 2 bad
Network Modules and should try and order a 3rd new one.
Thanks for your help
Steve
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
