I think you probably need to use altaddr command on the citrix server so
that the server will respond to the client with the translated address. It
may also be that the PIX is not letting the high TCP and UDP ports out.
Check out this document
http://ctxex10.citrix.com/texpert.nsf/2e89dc7305e02e12852566650069ba69/1d8d6
1ab7002edbb852567ee005b020d?OpenDocument
Hope that helps.
Lonnie
"Steve Smith" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey gang I am having problems running published apps in Citrix. I opened
the
> 2 correct ports but the published apps still do not work through my PIX.
If
> I give each server a public IP address than they work fine. Right now I am
> using statics for outside to inside addresss.
>
> Any ideas????
>
> THanks in advance,
> Steve
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
