yes. you are right but this command exist
frame-relay traffic-rate average [peak]
not
Frame-relay traffic-rate [bit-rate [burst-size][excess-burst-size]]
the difference is in the option (the meaning are about the same but the
syntax is different).
The options "bit-rate [burst-size [excess-burst-size]]" are related to
traffic-shape rate bit-rate [burst-size [excess-burst-size]]
and is Generic Traffic Shaping not Frame-Relay Traffic Shaping.
Stefano
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: mercoledì 30 agosto 2000 20.26
> To: Bosio Stefano
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: RE: Help on Frame-relay Traffic-shaping command
>
>
>
> Actually, The "frame-relay traffic-rate" command DOES exist.
> It is used as
> a simpler alternative to using the three commands for setting
> up traffic
> shaping on Frame Relay ("frame-relay cir out", "frame-relay
> be out", and
> "frame-relay bc out").
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios12
0/12cgcr/wan_r/wrfrelay.htm#6354
frame-relay traffic-rate average [peak]
average = average rate in bits per second; equivalent to specifying the
contracted CIR
peak = (Optional) Peak rate, in bits per second; equivalent to CIR + Be/Tc
= CIR (1 + Be/Bc) = CIR + EIR.
the configured peak and average rates are converted to the equivalent CIR,
excess burst size (Be), and committed burst size (Bc) values
Karen E Young
Network Engineer
ELF Technologies, Inc
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
