I have a network that is all part of an EIGRP community. 2 routers (using
hsrp internally) are direct connected to 2 other routers through 2 T1s.
Does EIGRP automatically load balance the 2 lines? Here is a (lousy
Diagram)
_10.1.1.2(E0) r3
192.168.253.1(s0)-----------------------------192.168.253.2
(s0)-r4-192.168.251.225(e0)_
10.1.1.1<
>192.168.251.226 (HSRP)
_10.1.1.3(E0) r1
192.168.252.1(s0)-------------------------------192.168.252.2(s0)-r2-192.168
.251.224(e0)_
So anyone from 10.1.1.1 going to 192.168.251.0, the 2 lines SHOULD ideally
load balance...Will EIGRP aoutmatically do this?
Blake Traister
Senior Network Engineer
SBC Interactive Media
626 585 2825
Packet Lube is for everyone, not the fortunate few...
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
