I think if you want to completely reset the switch configuration you can
type the following:
clear config all
I'm not sure it'll work on a 2924 because I'm not familiar with them, but it
certainly works on a 2948G.
Give it a try, but be aware that on the 2948G, this literally resets the
running config as if you had just taken it out of the box. That means you
lose VLANs (except for VLAN1) and all the configuration options get set to
the default.
"Masaru Umetsu" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
| Please tell me how to clear the vtp domain name in Catalyst 2924!
|
| Vtp domain name isn't set anything first.Then I configured it to
| Cisco but, I want to back to the initial.
| I did 'write erase', but vtp domain name wasn't cleared.
|
| _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/
| Masaru Umetsu
| E-mail:[EMAIL PROTECTED]
| _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
| Where there's a will, there's a way.
|
| ___________________________________
| UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
| FAQ, list archives, and subscription info: http://www.groupstudy.com
| Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
|
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
