>From which mode are you trying to upgrade the image ?
look at the output of the show version command and it
should state the flash status as Read/Write ,,, This means
that you have to be in the Boot Mode.
-----Original Message-----
From: Saud Shaikh <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, September 03, 2000 12:42 AM
Subject: IOS upgrade
>Hi,
>I have a problem regarding IOS upgrade.
>I am able to backup the existing image from the FLASH to the TFTP server.
>However, when I try doing an IOS upgrade from the TFTP to the FLASH, I get
>message saying, "%FLH: Flash download failed."
>I have IOS 11.1(3) filename: flash:igs-j-l.111-3 and I am trying to upgrade
>to IOS 12.0(12) filename: c2500-js56i-l.120-12.bin
>I am upgrading the router from the AUI port connected via Ethernet 10BaseT
>transceiver. I assigned 10.10.10.2 to my PC running TFTP with 10.10.10.1
as
>default gateway. I assigned the 10.10.10.1 to the Ethernet Interface on
>the Cisco 2513 router.
>The specs for ROUTER are as follows
>RAM 16 Mb
>Flash 16Mb
>Router boots from Flash.
>
>I would appreciate help.
>
>Thanks
>
>SAUD
>
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
