Thanks for your reply guys. Yes there is connectivity. This is how I was able to
add the printer port to Windows 2000 (TCP/IP Port). Anywasy The printer is an HP
Deskjet 970 ( I believe). I have also noticted the following:
router 2 has IOS V12 and router has IOS 11.x. Looks like each IOS has
different defaults. The V12 had the "No directed broadcast" by default, so I
enabled that for now. I also added IP Helper-address statements to each ethernet
interface on each router to use directed broadcast into the other segment, ie,
on router1's e0 (10.1.1.17) I used the ip helper 15.255.255.255, and on
router2's e0 (15.1.1.17) I used the helper address 10.255.255.255.
Printing on the local segment is okay. I also tried to use the Network Monitor
that ships with Win2K and capture packets while printing from the local segment.
I thought maybe it would show the port used, but it does not.
David Williams wrote:
> Okay, you've got connectivity, but TCP/IP printing often involves port
> numbers.
> What is your printer model? Port assignments vary from manufacturer to
> manufacturer. Apple LaserWriters configure differently than Xerox DocuPrint
> printers. Check your documentation.
> By far the easiest config I've managed to work (and I work with mixed
> Windows/98/NT and Mac OS environments) is to enable TCP/IP printing through
> the NT server, use LPR and assign requisite drivers and port assignments. I
> can't imagine that W2K is much different.
> Another question: can you print on a local segment from the W2K server? Try
> it....
>
> ""Amjad M. Afana"" <[EMAIL PROTECTED]> wrote in message
> 8p03nu$bir$[EMAIL PROTECTED]">news:8p03nu$bir$[EMAIL PROTECTED]...
> > From Router2 (Different Segment as the print server is concerned) and my
> > print server is 10.1.1.5
> >
> > Welcome. Router 2524
> >
> >
> > User Access Verification
> >
> > Password:
> > r2524>en
> > Password:
> > r2524#ping 10.1.1.5
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 4/12/36 ms
> > r2524#
> >
> > --------------------------------------------------------------------------
> --
> > ------
> > From Router1 ( on same segment)
> >
> > WelcomeWelcome. Router 2514
> >
> > User Access Verification
> >
> > Password:
> > r2514>en
> > Password:
> > r2514#ping 10.1.1.5
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 10.1.1.5, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
> > r2514#
> >
> > --------------------------------------------------------------------------
> --
> > From Windows 2000 Server ( on the far segment)
> >
> > E:\Documents and Settings\Administrator>ipconfig/all
> >
> > Windows 2000 IP Configuration
> >
> > Host Name . . . . . . . . . . . . : sbo2000
> > Primary DNS Suffix . . . . . . . : test.com
> > Node Type . . . . . . . . . . . . : Hybrid
> > IP Routing Enabled. . . . . . . . : No
> > WINS Proxy Enabled. . . . . . . . : No
> > DNS Suffix Search List. . . . . . : test.com
> >
> > Ethernet adapter Local Area Connection:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : LNE100TX Fast Ethernet Adapter
> > Versi
> > on 1.0
> > Physical Address. . . . . . . . . : 00-A0-CC-22-F9-DD
> > DHCP Enabled. . . . . . . . . . . : No
> > IP Address. . . . . . . . . . . . : 15.1.1.1
> > Subnet Mask . . . . . . . . . . . : 255.0.0.0
> > Default Gateway . . . . . . . . . : 15.1.1.17
> > DNS Servers . . . . . . . . . . . : 15.1.1.1
> >
> > E:\Documents and Settings\Administrator>ping 10.1.1.5
> >
> > Pinging 10.1.1.5 with 32 bytes of data:
> >
> > Reply from 10.1.1.5: bytes=32 time=10ms TTL=58
> > Reply from 10.1.1.5: bytes=32 time<10ms TTL=58
> > Reply from 10.1.1.5: bytes=32 time<10ms TTL=58
> > Reply from 10.1.1.5: bytes=32 time<10ms TTL=58
> >
> > Ping statistics for 10.1.1.5:
> > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
> > Approximate round trip times in milli-seconds:
> > Minimum = 0ms, Maximum = 10ms, Average = 2ms
> >
> > E:\Documents and Settings\Administrator>
> >
> >
> >
> > ""whatshakin"" <[EMAIL PROTECTED]> wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Ping the print server from the 2000 and from each router in between.
> Post
> > > your results here.
> > >
> > >
> > > ----- Original Message -----
> > > From: Amjad M. Afana <[EMAIL PROTECTED]>
> > > Newsgroups: groupstudy.cisco
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Sunday, September 03, 2000 9:00 PM
> > > Subject: Printer
> > >
> > >
> > > > I have network printer in one segment and wanted to print to it from
> > > remote
> > > > computers across a router (2 hops away). The printer is attached to an
> > > Intel
> > > > EtherExpress Pro 100 box and is configured to use TCP/IP printing. I
> was
> > > > able to install the printer on a remote Windows 2000 server, but could
> > not
> > > > print. I thought maybe I have to use some IP Forward statements on my
> > > router
> > > > (2500 series) but I am not sure what kind of IP or port number used.
> If
> > > > somebody knows about that or can direct me to find the port number,
> that
> > > > will be very much appreciated. TIA.
> > > >
> > > >
> > > > ___________________________________
> > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > >
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
