If you are using hyperterm to try adn issue a break, many people have had
problems with this. Try it with a different terminal emulator, or maybe
someone in the group can post the right key combo for hyperterm.
----- Original Message -----
From: "Cbridgett" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 04, 2000 5:53 PM
Subject: Config-reg
> I changed my configuration register to something stupid 0x0102 and now my
> router will not boot. Is there anyway I can change the config register.
I
> cannot enter through rommon, it will not take any break key combinations.
> Maybe a jumper on the board???
>
>
>
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
> o
> "...to hell with what other people think, I'm ridin' my own broom!" L. M.
>
> Cynthia Bridgett, raised in SE DC
> and proud of it!
> CCNA, MCSE, CNE, CNA, MCP, A+
>
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
> o
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
