I see no reason you cannot bring up both switches at the same time. Once the
2924C has been up for a minute or so you can start pulling the patch cables
from the old switch and start putting them in the new one. Your switch over
time will be essentially painless as long as the new switch is configured
correctly.
----- Original Message -----
From: ed smith <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 06, 2000 6:32 AM
Subject: Portfast ???
> I'm swapping out a 2900XL with a 2924C XL to give us Fiber capability.
Since
> we have customers on the current switch I want to keep down time to a
> minimum. One suggestion has been to, on the new switch put it into
portfast
> mode.
>
> Has anyone done this before? Are there any problems you encountered or
> things I should be aware of?
>
> Just a quick note today....
>
> Thanks for any input.
>
> Ed
> CCNA
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
