John,
Good luck getting Northpoint to reconfigure for Frame! Northpoint is REALLY
picky about the equipment that goes on their DSL circuits. If the 802 is
not a supported device by Northpoint, they will not appreciate you putting
that device on their network (and they may disconnect your service).
-Brad
"John Barnes" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I recently had IDSL installed from Northpoint.
>
> Long and short of it:
>
> I have a 802, and it will support IDSL. I'd like to
> use the 802 instead of the 3Com DSL bridge. The
> encapsulation according to Northpoint is VWAN(?).
>
> Does this mean ATM? Is is possible for me to
> configure the 802 to work with VWAN? If not, is it
> difficult for the ISP to have Northpoint reconfigure
> the DSLAM for Frame (I know the 802 supports frame for
> IDSL)?
>
> Thanks in advance!!
>
> -john
>
> __________________________________________________
> Do You Yahoo!?
> Kick off your party with Yahoo! Invites.
> http://invites.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
