Hello colleagues,
I have a problem with my ATM connection from my Cisco router to a Cisco BPX
ATM switch. When I look at the line on the switch, the line status is ok.
When I run the 'sh cont atm 1/0' command, I get the following output (maybe
anybody as an idea on where the error could be); I know this is going to be
a very long mail, but I can't help it:
zrh-atm#sh contr atm1/0
Interface ATM1/0 is down
Hardware is ATM E1
LANE client MAC address is 0002.4b76.0dd0
hwidb=0x81472004, ds=0x8148C564
slot 1, unit 0, subunit 0
rs8234 base 0x40800000, slave base 0x40800000
rs8234 ds 0x8148C564
SBDs - avail 2048, guaranteed 1, unguaranteed 2047, starved 0
Seg VCC table 4080B800, Shadow Seg VCC Table 814A8380, VCD Table
814BE3AC
Schedule table 40816800, Shadow Schedule table 814C43D8, Size 7CD
RSM VCC Table 4082BD00, Shadow RSM VCC Table 814C9414
VPI Index Table 40829280, VCI Index Table 4082B900
Bucket2 Table 40820480, Shadow Bucket2 Table 814C6338
MCR Limit Table 40820880, Shadow MCR Table 814C7F64
ABR template 40820A80, Shadow template 811FF798
RM Cell RS Queue 40829900
Queue TXQ Addr Pos StQ Addr Pos
0 UBR CHN0 40825A80 0 028B4EA0 0
1 UBR CHN1 40825E80 0 028B56A0 0
2 UBR CHN2 40826280 0 028B5EA0 0
3 UBR CHN3 40826680 0 028B66A0 0
4 VBR/ABR CHN0 40826A80 0 028B6EA0 0
5 VBR/ABR CHN1 40826E80 0 028B76A0 0
6 VBR/ABR CHN2 40827280 0 028B7EA0 0
7 VBR/ABR CHN3 40827680 0 028B86A0 0
8 VBR-RT CHN0 40827A80 0 028B8EA0 0
9 VBR-RT CHN1 40827E80 0 028B96A0 0
10 VBR-RT CHN2 40828280 0 028B9EA0 0
11 VBR-RT CHN3 40828680 0 028BA6A0 0
12 SIG 40828A80 0 028BAEA0 0
13 VPD 40828E80 0 028BB6A0 0
Queue FBQ Addr Pos RSQ Addr Pos
0 OAM 408EBD00 132 028BBF60 133
1 UBR CHN0 408ECD00 0 028BCF60 0
2 UBR CHN1 408EDD00 0 028BDF60 0
3 UBR CHN2 408EED00 0 028BEF60 0
4 UBR CHN3 408EFD00 0 028BFF60 0
5 VBR/ABR CHN0 408F0D00 8 028C0F60 9
6 VBR/ABR CHN1 408F1D00 0 028C1F60 0
7 VBR/ABR CHN2 408F2D00 0 028C2F60 0
8 VBR/ABR CHN3 408F3D00 0 028C3F60 0
9 VBR-RT CHN0 408F4D00 0 028C4F60 0
10 VBR-RT CHN1 408F5D00 0 028C5F60 0
11 VBR-RT CHN2 408F6D00 0 028C6F60 0
12 VBR-RT CHN3 408F7D00 0 028C7F60 0
13 SIG 408F8D00 0 028C8F60 0
SAR Scheduling channels: -1 -1 -1 -1 -1 -1 -1 -1
ATM channel number is 0
Link 0 IMA Info:
group index is 99
Tx link id is 0, Tx link state is notInGroup
Rx link id is 99, Rx link state is notInGroup
Rx link failure status is noFailure,
0 tx failures, 1 rx failures
Link 0 Framer Info:
framing is Multiframe-CRC4, line code is HDB3, impedance is 120 ohm
clock src is line, payload-scrambling is enabled, no loopback
line status is 0x420; or Rx LOF, Tx LOMF.
port is active, link is unavailable
36213058 idle rx, 1917 correctable hec rx, 309882 uncorrectable hec
rx
2248 cells rx, 0 cells tx, 0 rx fifo overrun.
Link (0):DS1 MIB DATA:
Data in current interval (298 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 331 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 332 Unavail
Secs
Total Data (last 9 15 minute intervals):
8191 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 8100 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 8100
Unavail Secs
SAR counter totals across all links and groups:
0 cells output, 0 cells stripped
zrh-atm#sh
I also include the configuration of the router:
sho run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname zrh-atm
!
logging buffered 4096 debugging
enable secret 5 *****************************
!
!
!
!
ip subnet-zero
!
!
!
interface FastEthernet0/0
ip address ***.***.***.*** 255.255.255.0
no ip redirects
no ip directed-broadcast
ip accounting output-packets
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
no ip directed-broadcast
shutdown
duplex auto
speed auto
!
interface ATM1/0
description ATM MCIWORLDCOM Main Interface 2 Mbit/s
no ip address
no ip directed-broadcast
load-interval 60
no atm ilmi-keepalive
scrambling-payload
impedance 120-ohm
!
interface ATM1/0.1 point-to-point
description ATM MCIWORLDCOM PVC Link to Walldorf
bandwidth 2048
ip address ***.***.***.*** 255.255.255.252
no ip directed-broadcast
pvc 8/1
vbr-nrt 1854 1854 1
no ilmi manage
oam-pvc 60
encapsulation aal5snap
!
!
interface ATM1/1
no ip address
no ip directed-broadcast
shutdown
no atm ilmi-keepalive
scrambling-payload
impedance 120-ohm
!
interface ATM1/2
no ip address
no ip directed-broadcast
shutdown
no atm ilmi-keepalive
scrambling-payload
impedance 120-ohm
!
interface ATM1/3
no ip address
no ip directed-broadcast
shutdown
no atm ilmi-keepalive
scrambling-payload
impedance 120-ohm
!
ip classless
no ip http server
!
!
line con 0
transport input none
line aux 0
line vty 0 4
password
login
!
end
zrh-atm#
Thanks for your help in advance.
Regards,
Georg
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
