I'm running 11.1 IOS so configs may have changed. The lack of map-group and
associated map-list is one difference between the configs.
interface ATM12/0
description Location TGE. Always node 1.
no ip address
!
interface ATM12/0.1 multipoint
description pvc to TGN
ip address xxx.yyy.7.249 255.255.255.252 secondary
ip address 10.18.35.1 255.255.255.0
map-group TGE
appletalk cable-range 35-35 35.1
appletalk zone ATM
atm pvc 1 0 35 aal5snap
map-list TGE
ip 10.18.35.4 atm-vc 1 broadcast
appletalk 35.4 atm-vc 1 broadcast
ip xxx.yyy.7.250 atm-vc 1 broadcast
> -----Original Message-----
> From: Hans Stout [mailto:[EMAIL PROTECTED]]
> Sent: Friday, September 08, 2000 12:10 PM
> To: [EMAIL PROTECTED]
> Subject: ATM deaming/line encoding problem
>
>
> Hello colleagues,
>
> I have a problem with my ATM connection from my Cisco router
> to a Cisco BPX
> ATM switch. When I look at the line on the switch, the line
> status is ok.
> When I run the 'sh cont atm 1/0' command, I get the following
> output (maybe
> anybody as an idea on where the error could be); I know this
> is going to be
> a very long mail, but I can't help it:
>
> zrh-atm#sh contr atm1/0
> Interface ATM1/0 is down
> Hardware is ATM E1
> LANE client MAC address is 0002.4b76.0dd0
> hwidb=0x81472004, ds=0x8148C564
> slot 1, unit 0, subunit 0
> rs8234 base 0x40800000, slave base 0x40800000
> rs8234 ds 0x8148C564
> SBDs - avail 2048, guaranteed 1, unguaranteed 2047, starved 0
> Seg VCC table 4080B800, Shadow Seg VCC Table 814A8380, VCD Table
> 814BE3AC
> Schedule table 40816800, Shadow Schedule table 814C43D8, Size 7CD
> RSM VCC Table 4082BD00, Shadow RSM VCC Table 814C9414
> VPI Index Table 40829280, VCI Index Table 4082B900
> Bucket2 Table 40820480, Shadow Bucket2 Table 814C6338
> MCR Limit Table 40820880, Shadow MCR Table 814C7F64
> ABR template 40820A80, Shadow template 811FF798
> RM Cell RS Queue 40829900
> Queue TXQ Addr Pos StQ Addr Pos
> 0 UBR CHN0 40825A80 0 028B4EA0 0
> 1 UBR CHN1 40825E80 0 028B56A0 0
> 2 UBR CHN2 40826280 0 028B5EA0 0
> 3 UBR CHN3 40826680 0 028B66A0 0
> 4 VBR/ABR CHN0 40826A80 0 028B6EA0 0
> 5 VBR/ABR CHN1 40826E80 0 028B76A0 0
> 6 VBR/ABR CHN2 40827280 0 028B7EA0 0
> 7 VBR/ABR CHN3 40827680 0 028B86A0 0
> 8 VBR-RT CHN0 40827A80 0 028B8EA0 0
> 9 VBR-RT CHN1 40827E80 0 028B96A0 0
> 10 VBR-RT CHN2 40828280 0 028B9EA0 0
> 11 VBR-RT CHN3 40828680 0 028BA6A0 0
> 12 SIG 40828A80 0 028BAEA0 0
> 13 VPD 40828E80 0 028BB6A0 0
>
> Queue FBQ Addr Pos RSQ Addr Pos
> 0 OAM 408EBD00 132 028BBF60 133
> 1 UBR CHN0 408ECD00 0 028BCF60 0
> 2 UBR CHN1 408EDD00 0 028BDF60 0
> 3 UBR CHN2 408EED00 0 028BEF60 0
> 4 UBR CHN3 408EFD00 0 028BFF60 0
> 5 VBR/ABR CHN0 408F0D00 8 028C0F60 9
> 6 VBR/ABR CHN1 408F1D00 0 028C1F60 0
> 7 VBR/ABR CHN2 408F2D00 0 028C2F60 0
> 8 VBR/ABR CHN3 408F3D00 0 028C3F60 0
> 9 VBR-RT CHN0 408F4D00 0 028C4F60 0
> 10 VBR-RT CHN1 408F5D00 0 028C5F60 0
> 11 VBR-RT CHN2 408F6D00 0 028C6F60 0
> 12 VBR-RT CHN3 408F7D00 0 028C7F60 0
> 13 SIG 408F8D00 0 028C8F60 0
> SAR Scheduling channels: -1 -1 -1 -1 -1 -1 -1 -1
> ATM channel number is 0
> Link 0 IMA Info:
> group index is 99
> Tx link id is 0, Tx link state is notInGroup
> Rx link id is 99, Rx link state is notInGroup
> Rx link failure status is noFailure,
> 0 tx failures, 1 rx failures
> Link 0 Framer Info:
> framing is Multiframe-CRC4, line code is HDB3, impedance
> is 120 ohm
> clock src is line, payload-scrambling is enabled, no loopback
> line status is 0x420; or Rx LOF, Tx LOMF.
> port is active, link is unavailable
> 36213058 idle rx, 1917 correctable hec rx, 309882
> uncorrectable hec
> rx
> 2248 cells rx, 0 cells tx, 0 rx fifo overrun.
> Link (0):DS1 MIB DATA:
> Data in current interval (298 seconds elapsed):
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 331 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs,
> 332 Unavail
> Secs
> Total Data (last 9 15 minute intervals):
> 8191 Line Code Violations, 0 Path Code Violations,
> 0 Slip Secs, 8100 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins,
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 8100
> Unavail Secs
> SAR counter totals across all links and groups:
> 0 cells output, 0 cells stripped
>
> zrh-atm#sh
>
> I also include the configuration of the router:
>
> sho run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname zrh-atm
> !
> logging buffered 4096 debugging
> enable secret 5 *****************************
> !
> !
> !
> !
> ip subnet-zero
> !
> !
> !
> interface FastEthernet0/0
> ip address ***.***.***.*** 255.255.255.0
> no ip redirects
> no ip directed-broadcast
> ip accounting output-packets
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> no ip address
> no ip directed-broadcast
> shutdown
> duplex auto
> speed auto
> !
> interface ATM1/0
> description ATM MCIWORLDCOM Main Interface 2 Mbit/s
> no ip address
> no ip directed-broadcast
> load-interval 60
> no atm ilmi-keepalive
> scrambling-payload
> impedance 120-ohm
> !
> interface ATM1/0.1 point-to-point
> description ATM MCIWORLDCOM PVC Link to Walldorf
> bandwidth 2048
> ip address ***.***.***.*** 255.255.255.252
> no ip directed-broadcast
> pvc 8/1
> vbr-nrt 1854 1854 1
> no ilmi manage
> oam-pvc 60
> encapsulation aal5snap
> !
> !
> interface ATM1/1
> no ip address
> no ip directed-broadcast
> shutdown
> no atm ilmi-keepalive
> scrambling-payload
> impedance 120-ohm
> !
> interface ATM1/2
> no ip address
> no ip directed-broadcast
> shutdown
> no atm ilmi-keepalive
> scrambling-payload
> impedance 120-ohm
> !
> interface ATM1/3
> no ip address
> no ip directed-broadcast
> shutdown
> no atm ilmi-keepalive
> scrambling-payload
> impedance 120-ohm
> !
> ip classless
> no ip http server
> !
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password
> login
> !
> end
>
> zrh-atm#
>
> Thanks for your help in advance.
>
> Regards,
>
> Georg
> ______________________________________________________________
> ___________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
>
> Share information about yourself,
> create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associate-Announcement.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]