On Fri, 8 Sep 2000, Richard wrote:
> The switch I am trying to upgrade is a 2924XL w/ approximately 1.8flash and
> 5meg of ram. This comes with a standard IOS version. After upgrading it to
> enterprise edition same version number as its original one, I get boot
> problem after rebooting. I'd appreciated some pointers on how to getting
> this backup. If this switch can't run enterprise edition, how would I go
> about putting its standard version back on?
Cisco's first run of 2924XL switches were of a different architecture.
The cabinet is physically deeper, and the RAM is 4MB rather than 8. They
take a different series of IOS images, specifically compiled for the early
hardware. It's somewhat confusing on CCO.
Try this link for images for the earlier 4MB switches:
http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB
Archived earlier images are hree:
http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB-archives
You'll need CCO access.
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]