The switch I am trying to upgrade is a 2924XL w/ approximately 1.8flash and
5meg of ram. This comes with a standard IOS version. After upgrading it to
enterprise edition same version number as its original one, I get boot
problem after rebooting. I'd appreciated some pointers on how to getting
this backup. If this switch can't run enterprise edition, how would I go
about putting its standard version back on?
Thanks in advanve for any input.
C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA2, RELEASE SOFTWARE
(fc1)
Compiled Fri 24-Apr-98 10:51 by rheaton
starting...
Base ethernet MAC Address: 00:90:ab:f7:63:c0
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 71 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 1728000
flashfs[0]: Bytes used: 1655808
flashfs[0]: Bytes available: 72192
flashfs[0]: flashfs fsck took 4 seconds.
...done Initializing Flash.
Loading "flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin"...Bootable image segment
12288
address range [0x34ca40, 0x3000] not in range [0x300000, 0x33f98c].
Error loading "flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch: set
?=
BOOT=flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin
MAC_ADDR=00:90:AB:F7:63:C0
MOTHERBOARD_ASSEMBLY_NUM=73-2910-05
MOTHERBOARD_SERIAL_NUM=FAA02349HM6
SYSTEM_SERIAL_NUM=FAA0234W0HW
help=
switch:
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
