you can define two default gateways ... check it yourself if you have access
to a router.
Atif
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Kaberna
Sent: Sunday, September 10, 2000 1:58 PM
To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED]
Subject: Re: Two WAN conn.
Show me where you read that having 2 default routes will automatically be
load balanced. As far as I know that is not the case. It is also rare that
a provider will advertise any routes without using BGP. I have not heard of
any provider advertising default routes. I could be wrong and if so please
tell me where you found this info.
John
----- Original Message -----
From: Atif Awan <[EMAIL PROTECTED]>
To: John Kaberna <[EMAIL PROTECTED]>; Gunjan Mathur
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, September 10, 2000 1:56 AM
Subject: RE: Two WAN conn.
>
> If the links are from different providers then you will have to go for
BGP.
> If the links are from the same provider then you can make the provider
> advertise default routes with the same metrics so that your router will
> automatically load balance between the links. You can also define two
> default routes with the same metrics and the router will load balance
> between them.
>
> Regards
> Atif
>
>
> -----Original Message-----
> From: John Kaberna [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, September 10, 2000 1:35 PM
> To: Atif Awan; Gunjan Mathur; [EMAIL PROTECTED]
> Subject: Re: Two WAN conn.
>
>
> Can you run a routing protocol? If so, the router will automatically load
> balance across both links if they are both the same bandwidth. If you use
> default or static routes it will only use one link.
>
> ----- Original Message -----
> From: Atif Awan <[EMAIL PROTECTED]>
> To: Gunjan Mathur <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Sunday, September 10, 2000 12:59 AM
> Subject: RE: Two WAN conn.
>
>
> >
> > Will the other link be from the same provider ?
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Gunjan Mathur
> > Sent: Sunday, September 10, 2000 11:25 AM
> > To: [EMAIL PROTECTED]
> > Subject: Two WAN conn.
> >
> >
> > Hi,
> >
> > I'm new to this field pls help me to confiure two
> > serial connection.
> >
> > Right have I have one leased connection and I
> > configured my router according to that and woriking
> > fine with this.
> > But now we are going to take one more leased line but
> > I have no idea how to configure my router such a way
> > that It route traffic in two connections.
> >
> > Right now I'm using Defualt gatewayt command for first
> > leased connection now what I have to do for routing
> > through both connections.
> >
> > And I aslo looking for a way through which I can
> > balance the load in between two lines. And I f one
> > goes down automatical data is switched to other one.
> >
> >
> > TIA
> >
> > Gm
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Mail - Free email you can access from anywhere!
> > http://mail.yahoo.com/
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
