Phil,
Thanks for the info, so you don't know if there is a command to change speed, duplex,
vlan membership etc, in the ios 6500 there is a command interface range <interface
number> to do this and you can specify ranges in the catos, why not in the 3500.
cheers
Colin
At 04:03 PM 9/11/00 +0100, Phil Barker wrote:
>Colin,
>
>I normally cut and paste for 2924 and 3524 switches.
>i.e do one port by hand in notepad or whatever and
>then build up your config via cut and paste editing
>the interface number along the way. Then go to "conf
>t" on the target switch and cut and paste the lot.
>
>Regards,
>
>Phil.
>
>--- Colin Byelong <[EMAIL PROTECTED]> wrote: > Hi,
>we have a number of 3524 cisco lan switches and
>> i can't seem to find
>> a command to configure muliple ports to a vlan at
>> the same time in cat
>> os the command is set vlan <vlan number> port number
>> or range eg.
>> 5/1-24, 6/1-1
>> The only way i can do this on a 3500 series is
>> through the web interface
>> unless you know better.
>>
>> cheers
>>
>> colin
>>
>> **NOTE: New CCNA/CCDA List has been formed. For more
>> information go to
>> http://www.groupstudy.com/list/Associates.html
>> _________________________________
>> UPDATED Posting Guidelines:
>> http://www.groupstudy.com/list/guide.html
>> FAQ, list archives, and subscription info:
>> http://www.groupstudy.com
>> Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
>
>
>____________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
>or your free @yahoo.ie address at http://mail.yahoo.ie
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
