Well, in a half duplex CSMA/CD environment collisions
are expected. Even between a switch and router port,
unless your configured at 100meg full duplex. Also,
make sure the router and switch ports are not set to
auto-negoinate speed/duplex, manually set it.
This is your primary link out to the internet, I
suspect alot of users are hitting the internet.
There's constant traffic over this switch/router
connection and if you have high amount of collisions ,
transmit defered, etc you should look at going to
100meg full duplex.
--- Kuncoro Wijaya <[EMAIL PROTECTED]> wrote:
> Dear all,
>
> I have also one problem regarding the a.m matters.
>
> We have a network conf. as follows :
>
>
> (((( INTERNET ))))
> |
> |
> (X) Router from ISP (R1)
> |E0 : 192.168.1.1 255.255.255.0
> | (a Class C, just for example)
> |
> |Switch|
> |
> |
> |E0 : 192.168.1.2 255.255.255.0
> (X) Our Router (R2)
> |E1
> |
> --------------------
> | | | |
> Our Network
>
> In our router, R2, we have a command line like this:
> ip route 0.0.0.0 0.0.0.0 192.168.1.1
>
> The static route (default route) is working,
> however,
> when we look at the interface E0 of R2 (sh int e0),
> we
> see a lot of collisions.
>
> Could the problem be arisen due to the nature of
> ethernet connection (CSMA/CD), although we have used
> a
> switch to connect to E0 of R1? And how to overcome
> this problem as it is the service given by the ISP ?
>
> I need your analysis on this.
>
> Thanks in adv
>
> Kuncoro
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Priscilla Oppenheimer
> Sent: Monday, September 11, 2000 11:23 PM
> To: jeongwoo park; [EMAIL PROTECTED]
> Subject: Re: static route question ??
>
>
> That's correct, and having a lower administrative
> distance means that a
> static route is "preferred" over a dynamic route,
> but
> not "faster." If the
> router has more than one way to get to a network in
> its routing table, it
> selects the path with the lowest administrative
> distance, which would be a
> static route by default.
>
> Sorry, if it seems like I'm being picky, but it
> sounded like maybe someone
> had told you the static route would be faster. It's
> probably just a
> language thing. We Americans expect everyone to
> understand our strange
> wordings! &;-)
>
> Priscilla
>
> At 03:09 PM 9/11/00, jeongwoo park wrote:
> >Thanks for your reply
> >Just want to clarify what I meant.
> >When I said that static route gives us faster
> traffic
> >transmission, it meant that static route's
> >administrative distance is 1, which is lower than
> >other dynamic routing protocols' administrative
> >distance.
> >Can I say this?
> >Please correct me if I am wrong.
> >
> >Thanks in adv.
> >
> >jeongwoo
__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
