1. It'd have to be C
I believe network 10.1.0.0 would assume default mask.
As you said, B, D & E are all wrong syntax
2. Not sure, but I'd go with C.
See here for more info on Atomic Aggregate:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/n
p1_c/1cbgp.htm
(watch the word wrap)
Bob
----- Original Message -----
From: Peter Abraham <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 14, 2000 5:01 PM
Subject: BGP **** CCO QUESTION ** PA
> All these are questions that I got from the CCO BCSN tests.
>
> 1. Which command allows Router A to advertise subnet 10.1.0.0/24 in BGP?
>
> A. network 10.1.0.0
> B. network 10.1.0.0 255.255.0.0
> C. network 10.1.0.0 mask 255.255.0.0
> D. network 10.1.0.0/16
> E. network 10.1.0.0 prefix 16
>
> I have my answer as A. B,D, and E all have the wrong syntax. Is C right?
I
> know that the mask length for C is 16.
>
> 2. What is the function of the BGP atomic aggregate attribute?
>
> A. To indicate that the originating router has aggregated the routes
> B. To specify the BGP router ID and AS number of the router that
performed
> the route aggregation
> C. To specify the AS number of the router that performed the route
> aggregation
> D. To specify the AS number of the router that performed the route
> aggregation and the AS numbers of the non-aggregated routes
>
> Answer: A.
>
> I have searched the CISCO web site and cannot find information on BGP
atomic
> aggregate attribute.
>
> Finally, how do prefix lists have support for incremental updates? Does
> anyone have a simple explanation for this?
>
> I appreciate your assistance.
>
> Peter.
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]