It sounds like they're both identical. That's good.
Do you have ALL the interfaces in an UP state? and each pair of interfaces
are on the same hub?
A down interface will be considered a failure....
Both configs are identical? You power cycled both boxes at the same time?
Rodgers Moore
""BE"" <[EMAIL PROTECTED]> wrote in message 8pt9cl$t1g$[EMAIL PROTECTED]">news:8pt9cl$t1g$[EMAIL PROTECTED]...
> Hey gang! Any Pix gurus out there?
>
> I've been playing with a couple of Pixs (510s) trying to get the failover
to
> work. I thought it would be a piece of cake, but it just isn't showing me
> any love. Ive got (2) Pix 510s that each have 3 NICs in them (internal,
> untrusted, DMZ) each running 4.4. Everything seems all fine and dandy
until
> about 10 minutes later when the standby PIX starts stealing the DMZ
> connections.
>
> Any thoughts?
>
> -Brad
> bellis@opts ys.net
>
> used cisco hardware: www.opt sys.net
> cisco hardware newsgroup: news://news.opts ys.net/cisco.hardware
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
