If this is an older Firmware switch, this cable must be a null modem pin...
Good Luck !!!
Phil
----- Original Message -----
From: "Hans Schimek" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 15, 2000 7:10 PM
Subject: Configuring Catalyst 1200 ?
> i got a catalyst 1200 .
> it cannot be configured via the
> db-9 to RJ45 cable.
> the documentation says that i have to use the db25 to RJ45 cable.
> but i do not have a second COM Port with an RS232 interface.
> any advice ?
>
>
> thanx
> hans
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
