Here are two good links that will be helpful.
http://www.cisco.com/warp/public/473/25.html
http://www.cisco.com/warp/public/473/29.html
-----Original Message-----
From: BB [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 15, 2000 8:16 PM
To: [EMAIL PROTECTED]
Subject: 2948G L3, route between Vlan
Hi
i've setup two vlan in the switch.
but packet can't route from one vlan to other vlan...
how can i enable routing between vlan?
thx
BB
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]