RE: MAU trouble shooting

[Dave Hennen]

I assume you've tried different ports and different cables   If it's a real IBM mau you may have to reinitialize the port.  there is a battery powered tool that used to come with the mau.  It also could be a speed mismatch if the mau has a way to set the ring speed.  There used to be 4mbps only media filters (back in the day) if you are using one of those on a 16mbps ring, weird things can happen.   daveh -----Original Message----- From: Circusnuts [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 17, 2000 6:05 AM To: [EMAIL PROTECTED] Subject: MAU trouble shooting Does this mean my MAU is fried ???  It has never come off initializing (left the routers run connected all night)...     TokenRing0 is initializing, line protocol is down   Hardware is TMS380, address is 0000.30c0.ec2a (bia 0000.30c0.ec2a)   Internet address is 195.5.5.10/24   MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, rely 255/255, load 1/255   Encapsulation SNAP, loopback not set, keepalive set (10 sec)   ARP type: SNAP, ARP Timeout 04:00:00   Ring speed: 16 Mbps   Single ring node, Transparent Bridge capable   Source bridging enabled, srn 49904 bn 0 trn 49904     proxy explorers disabled, spanning explorer disabled, NetBIOS cache disable   Thanks !!! Phil