Dear Nathan,
Currently i am installing Pix Firewall Manager ver 4.3(2)e, it's not smooth
as i read in a CCO.
We have a problem when loading PIX configuration. It seems that the PIX
cannot send the config to PFM server.
I have open the telnet for PIX manager.
Hosts spec are:
Windows NT server with service pack 4
96 Mb Ram
IE browser 4.0 version 4.72.3110.8 updated version:SP1
Static IP address in inside PIX interface
After typing username and password to logon, there are several IO error
-- IO exception error:This file,adm_admc.txt may not exist
There are about 10 or more txt file error notification that may not exist.
and when loading the configuration we have also error reported by PIX and
sent to PIX manager (file Attached)
So due to this error the PIX configuration cannot be loaded by PFM.
Has anybody install PFM???
Please advise!!
1: 10.10.1.1: Unable to Show Interface (cmdCode = 1903).
2: 10.10.1.1: Unable to Show Global (cmdCode = 103).
3: 10.10.1.1: Unable to Show NAT (cmdCode = 203).
4: 10.10.1.1: Unable to Show No AT (cmdCode = 503).
5: 10.10.1.1: Unable to Show Static (cmdCode = 303).
6: 10.10.1.1: Unable to Show Conduit (cmdCode = 403).
7: 10.10.1.1: Unable to Show Outbound (cmdCode = 603).
8: 10.10.1.1: Unable to Show Apply (cmdCode = 703).
9: 10.10.1.1: Unable to Show Alias (cmdCode = 4803).
10: 10.10.1.1: Unable to Show Telnet (cmdCode = 1503).
11: 10.10.1.1: Unable to Show Telnet (cmdCode = 1503).
12: 10.10.1.1: Unable to Logging Message (cmdCode = 908).
13: 10.10.1.1: Unable to Show ARP (cmdCode = 1003).
14: 10.10.1.1: Unable to Show ARP Duration (cmdCode = 1103).
15: 10.10.1.1: Unable to Show AAA Authentication (cmdCode = 3203).
16: 10.10.1.1: Unable to Show AAA Accounting (cmdCode = 5803).
17: 10.10.1.1: Unable to Show AAA Authorization (cmdCode = 3903).
18: 10.10.1.1: Unable to Show Static Route (cmdCode = 1303).
19: 10.10.1.1: Unable to Show Default Route (cmdCode = 1203).
20: 10.10.1.1: Unable to Show SNMP Community (cmdCode = 5503).
21: 10.10.1.1: Unable to Show SNMP Host (cmdCode = 1603).
22: 10.10.1.1: Unable to Show SNMP Contact (cmdCode = 1703).
23: 10.10.1.1: Unable to Show SNMP Location (cmdCode = 1803).
24: 10.10.1.1: Unable to Show SNMP Traps (cmdCode = 6503).
25: 10.10.1.1: Unable to Show Syslog Output (cmdCode = 903).
26: 10.10.1.1: Unable to Show Syslog Output (cmdCode = 903).
27: 10.10.1.1: Unable to Show Url Filter Server (cmdCode = 6203).
28: 10.10.1.1: Unable to Show Filter (cmdCode = 6603).
29: 10.10.1.1: Unable to Show established (cmdCode = 4703).
30: 10.10.1.1: Unable to Show RIP (cmdCode = 2003).
31: 10.10.1.1: Unable to Show Failover (cmdCode = 2103).
32: 10.10.1.1: Unable to Show Fixup Protocol (cmdCode = 6003).
33: 10.10.1.1: Unable to Show RADIUS Server (cmdCode = 4003).
34: 10.10.1.1: Unable to Show TACACS Server (cmdCode = 4103).
35: 10.10.1.1: Unable to Show Timeout (cmdCode = 4903).
36: 10.10.1.1: Unable to Show Link (cmdCode = 4203).
37: 10.10.1.1: Unable to Show Linkpath (cmdCode = 4303).
38: 10.10.1.1: Unable to Show Uauth (cmdCode = 5003).
39: 10.10.1.1: Unable to Show Age Duration (cmdCode = 4403).
40: 10.10.1.1: Unable to Show TFTP Server (cmdCode = 6303).
41: 10.10.1.1: Unable to Show Virtual Server (cmdCode = 6103).
42: 10.10.1.1: Unable to Show Blocks (cmdCode = 2603).
43: 10.10.1.1: Unable to Show Memory (cmdCode = 2903).
44: 10.10.1.1: Unable to Show Connection (cmdCode = 2703).
45: 10.10.1.1: Unable to Show Checksum (cmdCode = 5903).
46: 10.10.1.1: Unable to Show Url Cache Stat (cmdCode = 6803).
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
