you're right. i have had a lot of trouble last month because the manager
SAYs that it has sent some commands but looking at the pix, the config was
not complete. i suggest the old and kind telnet...
> -----Mensaje original-----
> De: Wibowo Nur Susetio [SMTP:[EMAIL PROTECTED]]
> Enviado el: Tuesday, September 19, 2000 10:27 PM
> Para: [EMAIL PROTECTED]
> Asunto: PIX Firewall manager
> Importancia: Alta
>
> Dear Nathan,
>
> Currently i am installing Pix Firewall Manager ver 4.3(2)e, it's not
> smooth
> as i read in a CCO.
> We have a problem when loading PIX configuration. It seems that the PIX
> cannot send the config to PFM server.
> I have open the telnet for PIX manager.
>
> Hosts spec are:
> Windows NT server with service pack 4
> 96 Mb Ram
> IE browser 4.0 version 4.72.3110.8 updated version:SP1
> Static IP address in inside PIX interface
>
> After typing username and password to logon, there are several IO error
>
> -- IO exception error:This file,adm_admc.txt may not exist
>
> There are about 10 or more txt file error notification that may not exist.
>
> and when loading the configuration we have also error reported by PIX and
> sent to PIX manager (file Attached)
>
> So due to this error the PIX configuration cannot be loaded by PFM.
>
> Has anybody install PFM???
>
> Please advise!!
>
> 1: 10.10.1.1: Unable to Show Interface (cmdCode = 1903).
> 2: 10.10.1.1: Unable to Show Global (cmdCode = 103).
> 3: 10.10.1.1: Unable to Show NAT (cmdCode = 203).
> 4: 10.10.1.1: Unable to Show No AT (cmdCode = 503).
> 5: 10.10.1.1: Unable to Show Static (cmdCode = 303).
> 6: 10.10.1.1: Unable to Show Conduit (cmdCode = 403).
> 7: 10.10.1.1: Unable to Show Outbound (cmdCode = 603).
> 8: 10.10.1.1: Unable to Show Apply (cmdCode = 703).
> 9: 10.10.1.1: Unable to Show Alias (cmdCode = 4803).
> 10: 10.10.1.1: Unable to Show Telnet (cmdCode = 1503).
> 11: 10.10.1.1: Unable to Show Telnet (cmdCode = 1503).
> 12: 10.10.1.1: Unable to Logging Message (cmdCode = 908).
> 13: 10.10.1.1: Unable to Show ARP (cmdCode = 1003).
> 14: 10.10.1.1: Unable to Show ARP Duration (cmdCode = 1103).
> 15: 10.10.1.1: Unable to Show AAA Authentication (cmdCode = 3203).
> 16: 10.10.1.1: Unable to Show AAA Accounting (cmdCode = 5803).
> 17: 10.10.1.1: Unable to Show AAA Authorization (cmdCode = 3903).
> 18: 10.10.1.1: Unable to Show Static Route (cmdCode = 1303).
> 19: 10.10.1.1: Unable to Show Default Route (cmdCode = 1203).
> 20: 10.10.1.1: Unable to Show SNMP Community (cmdCode = 5503).
> 21: 10.10.1.1: Unable to Show SNMP Host (cmdCode = 1603).
> 22: 10.10.1.1: Unable to Show SNMP Contact (cmdCode = 1703).
> 23: 10.10.1.1: Unable to Show SNMP Location (cmdCode = 1803).
> 24: 10.10.1.1: Unable to Show SNMP Traps (cmdCode = 6503).
> 25: 10.10.1.1: Unable to Show Syslog Output (cmdCode = 903).
> 26: 10.10.1.1: Unable to Show Syslog Output (cmdCode = 903).
> 27: 10.10.1.1: Unable to Show Url Filter Server (cmdCode = 6203).
> 28: 10.10.1.1: Unable to Show Filter (cmdCode = 6603).
> 29: 10.10.1.1: Unable to Show established (cmdCode = 4703).
> 30: 10.10.1.1: Unable to Show RIP (cmdCode = 2003).
> 31: 10.10.1.1: Unable to Show Failover (cmdCode = 2103).
> 32: 10.10.1.1: Unable to Show Fixup Protocol (cmdCode = 6003).
> 33: 10.10.1.1: Unable to Show RADIUS Server (cmdCode = 4003).
> 34: 10.10.1.1: Unable to Show TACACS Server (cmdCode = 4103).
> 35: 10.10.1.1: Unable to Show Timeout (cmdCode = 4903).
> 36: 10.10.1.1: Unable to Show Link (cmdCode = 4203).
> 37: 10.10.1.1: Unable to Show Linkpath (cmdCode = 4303).
> 38: 10.10.1.1: Unable to Show Uauth (cmdCode = 5003).
> 39: 10.10.1.1: Unable to Show Age Duration (cmdCode = 4403).
> 40: 10.10.1.1: Unable to Show TFTP Server (cmdCode = 6303).
> 41: 10.10.1.1: Unable to Show Virtual Server (cmdCode = 6103).
> 42: 10.10.1.1: Unable to Show Blocks (cmdCode = 2603).
> 43: 10.10.1.1: Unable to Show Memory (cmdCode = 2903).
> 44: 10.10.1.1: Unable to Show Connection (cmdCode = 2703).
> 45: 10.10.1.1: Unable to Show Checksum (cmdCode = 5903).
> 46: 10.10.1.1: Unable to Show Url Cache Stat (cmdCode = 6803).
>
>
>
>
>
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
