Below is a serial interface on a 7513 we are seeing output queue drops
I cleared the counters about 5 minutes previous to this output
any ideas on resolving this problem?
MTU 1500 bytes, BW 768 Kbit, DLY 20000 usec, rely 255/255, load 224/255
Encapsulation HDLC, loopback not set, keepalive set (10 sec)
Last input 00:00:00, output 00:00:01, output hang never
Last clearing of "show interface" counters 00:17:33
Queueing strategy: fifo
Output queue 0/40, 3820 drops; input queue 0/75, 0 drops
5 minute input rate 497000 bits/sec, 374 packets/sec
5 minute output rate 676000 bits/sec, 169 packets/sec
391198 packets input, 65520174 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
165281 packets output, 87180992 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
RTS up, CTS down, DTR up, DCD up, DSR up
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
