On the 2610 at least you want to put your card in the first slot - W0.
Have you tried moving the card to slot W0 or is there another card in
it? The first time I installed a 2610 I had the same type of error -
moved the WIC to slot W0 and the error went away.
David Toalson
816-701-4142
> ----------
> From: Gabriel[SMTP:[EMAIL PROTECTED]]
> Reply To: Gabriel
> Sent: Friday, September 22, 2000 2:18 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Unspecified Card
>
>
> ""alex campbell"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hello all,
> >
> > I have a cisco 2620 router...running IOS 12.0, I have also just got
> a 4T
> > serial card,
> > every time I power up the router...I get the message 'Unspecified
> Card in
> > Port 1'.
> > I have tried differend versions of IOS 12 all to no avail. I get the
> Green
> > EN light on the card to illuminate once the router powers up, but
> then it
> > turns itself off again.
> >
> > Any help much appreciated
> > Alex
>
> Not compatible. You can use an NM-4A/S if you don't need faster than
> 128K;
> otherwise, use two WIC-2T's.
>
> (If you're already using your WIC slots, you can get an NM-2W which
> will
> give you 2 more WIC slots.)
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]