I know that module will work in a 3600 not sure about a 2600....
Thanks,
Chris Boyd
Network Support
Alex Lee, Inc.
120 4th Street SW
Hickory, NC 28601
(828) 323-4103
http://www.alexlee.com
----- Original Message -----
From: "Gabriel" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Friday, September 22, 2000 3:18 PM
Subject: Re: Unspecified Card
>
> ""alex campbell"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hello all,
> >
> > I have a cisco 2620 router...running IOS 12.0, I have also just got a 4T
> > serial card,
> > every time I power up the router...I get the message 'Unspecified Card
in
> > Port 1'.
> > I have tried differend versions of IOS 12 all to no avail. I get the
Green
> > EN light on the card to illuminate once the router powers up, but then
it
> > turns itself off again.
> >
> > Any help much appreciated
> > Alex
>
> Not compatible. You can use an NM-4A/S if you don't need faster than 128K;
> otherwise, use two WIC-2T's.
>
> (If you're already using your WIC slots, you can get an NM-2W which will
> give you 2 more WIC slots.)
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
