The 2900XL/3500XL switches don't have any MLS funtionality (although the
3600 routers will support MLS on the Cat4/5/6000 series switches).
Therefore, any packet passing between VLANs will pass thru the router
interface.
hth
Andy
----- Original Message -----
From: Richard <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Saturday, September 23, 2000 6:06 PM
Subject: C3548XL & 3640 Vlan/ISL Trunk/MLS question.
> I have multiple Vlans configured on the Cat 3548XL and traffic between
Vlans
> are routed via a fast isl-trunk interface on the 3640. My question is does
> the switch pass subsequent frames directly from host to host(MLS
> functionality with the higher end switches) or each and every frame/packet
> need to pass through the router interface?
>
> Thanks
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
