Scott,
Hi! I'd be more than happy to give you a console cable for free, as long as
you pick up the shipping.
Brad
b e l l i s @ o p t s y s . n e t (remove the spaces)
""Scott S."" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi. I was wondering if anyone could help. I have a Cisco 1601 and no
> console cable. Based on what I have learned online, I have done the
> following:
>
> 1. I took a cat-5 straight through cable, pulled off the rj-45 connector
>
> and stuck it back on upside down to make a roll-over cable.
>
> 2. I purchased a RJ45/DB9F adapter.
>
> The problem is that the RJ45/DB9F adapter comes in two pieces and the
> wires
> must be manually inserted into the DB9F (serial) side of the adapter
> from
> the RJ45 side of the adapter. I'm not sure which wire goes where.
>
> There are 8 wires:
>
> 1. slate (gray)
> 2. brown
> 3. yellow
> 4. green
> 5. red
> 6. black
> 7. orange
> 8. blue
>
> There are 9 numbered holes on the DB9F side of the adapter. Does anyone
> know which wire goes in which hole (i.e., slate wire goes in hole 1,
> etc.)?
>
> Thanks,
>
> Scott
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
