On Wed, 27 Sep 2000, Henk Botha wrote:
> I am trying to connect two routers (1601's) back to back for testing. I
> setup the clock speed on the one, but still have no success
>
> What is the correct way of doing it ?
Details! Are you using WICs and if so which ones, external CSUs, or a
back-to-back cable?
Could you post configs?
What does "show interface" reveal?
> Please anybody that can help
It's better (at least for me) if you spend a bit more time filling in the
details in the first post to the list, instead of a generic "this doesn't
work" type of posting. In many cases you'll find that in the process of
gathering enough information to describe the problem in detail, you'll find
the solution yourself.
At a minimum, a "show running-config" and "show interface" for both
routers would be a good start. "show version" is nice to have as well.
>From the limited information you supplied, I'd look for:
Clocking applied to DCE side (or one WIC)
Proper cable, with DCE where you want it (proper crossover if CSU/WIC)
"no shutdown" on interfaces in question
Encapsulation, address, and mask configuration consistency.
--
Jay Hennigan - Network Administration - [EMAIL PROTECTED]
NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
WestNet: Connecting you to the planet. 805 884-6323
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
